Dimming actuator for electronic ballasts, 2-channels LBC3-02M

Description

• LBC3-02M is an analog 2-channels actuator designed to control dimmable ballasts of fl uorescent lamps or other light sources controlled
  by signal 0(1) - 10 V DC.
• In the iDM3, it is possible to set the output mode 0(1) - 10 V DC.
• During analog voltage output (0)1-10 V DC control, relay contact automatically switches power supply to light ballast
  (0% = relay OFF, 1-100% = relay ON)
• LBC3-02M contains 2 independent analog voltage outputs (0)1-10 V DC and their dependents 2 relays with potential-free contact.
• Maximum contacts load 16 A/4000 VA/AC1.
• Each of two channels is separately controllable and addressable.
• LEDs on front panel signals status of each channel.
• With control buttons on the front panel, it is possible to change the status of each channel separately.
• LBC3-02M in 3-MODULE version is designed for mounting into
  a switchboard/ DIN rail EN60715.

Technical parameters

• Output: 2x 0(1)-10 V 2x CO, 16 A
• Supply voltage (frequency): BUS 27 V DC
• Rated current from BUS: 60 mA (at 27 V DC)
• Housing: 3-MODULE
• Dimensions: 90 x 52 x 65 mm

Downloads

• Datasheet LBC3-02M

  Format: pdf | Size : 135 kB | 29. 09. 2022

• EC Declaration of conformity LBC3-02M

  Format: pdf | Size : 48 kB | 04. 12. 2017